Description
The Cobra Grip was quickly embraced by helicopter manufacturers for the improved switch layout and rapid repairability. The expanded flexibility brought more flight systems and controls to the grip. This proven control grip has been flying for over 30 years.
This grip places up to six switches (shown below right with four pushbuttons, a 4-way actuation switch, and a two-stage trigger) in an ergonomic position for the right hand. Optional configurations are available including a threaded bushing mount and with our transducer and 4-way switches for increased functionality such as cursor control (shown on the left below).
Optional Switches
S-1 : 4-Way trim switch. Shown here, rated at 28VDC for aerospace applications.
S-2 : Pushbutton switch. Available with red, black, or grey cap. Available with aerospace rating or commercial grade, and low current (below 15mA).
S-3 : Pushbutton switch (shown here with shroud). Available with red, black, or grey cap. Available with aerospace rating or commercial grade, and low current (below 15mA).
S-4 : Pushbutton switch. Available with red, black, or grey cap. Available with aerospace rating or commercial grade, and low current (below 15mA).
S-5 : Pushbutton switch. Available with red, black, or grey cap. Available with aerospace rating or commercial grade, and low current (below 15mA).
T-1 : Trigger switch. Available in either single-stage or two-stage actuation, and with either red or black color trigger. Optional trigger guard also available.
